New batch and continuous systems for converting hydrogen from water hyacinth

Water hyacinth was the chosen alternative biomass for H₂ production in this study. A batch and a continuous pilot plant systems are proposed. A batch system of 500?ml capacity was developed first for finding an appropriate biomass ratio which was found to be 2.5%wt. Results from the batch system was used to construct a kinetic model of water hyacinth hydrolysis. The same biomass and water ratio was used in the continuous system. Besides water hyacinth, glucose and cellulose?+?lignin biomasses were tested. During processing, temperature, pressure, and electric consumption of the system were recorded. The quality and quantity of gas products were analyzed by gas chromatography (GC). The water hyacinth biomass attained the highest rate of H₂ production (providing energy of 11.43?kWh/mole of glucose). Comparing the batch and continuous pilot systems, the continuous system achieved 2.7 times more H₂ mole% than the batch system did.     

Layered Birnessite Cathode with a Displacement/Intercalation Mechanism for High-Performance Aqueous Zinc-Ion Batteries

Mn-based rechargeable aqueous zinc-ion batteries(ZIBs)are highly promising because of their high operating voltages,attractive energy densities,and eco-friendliness.However,the electrochemical performances of Mn-based cathodes usually suffer from their serious structure transformation upon charge/discharge cycling.Herein,we report a layered sodium-ion/crystal water co-intercalated Birnessite cathode with the formula of Na0.55Mn2O4·0.57H2O(NMOH)for high-performance aqueous ZIBs.A displacement/intercalation electrochemical mechanism was confirmed in the Mn-based cathode for the first time.Na+and crystal water enlarge the interlayer distance to enhance the insertion of Zn^2+,and some sodium ions are replaced with Zn^2+ in the first cycle to further stabilize the layered structure for subsequent reversible Zn^2+/H^+ insertion/extraction,resulting in exceptional specific capacities and satisfactory structural stabilities.Additionally,a pseudo-capacitance derived from the surface-adsorbed Na^+ also contributes to the electrochemical performances.The NMOH cathode not only delivers high reversible capacities of 389.8 and 87.1 mA h g^−1 at current densities of 200 and 1500 mA g^−1,respectively,but also maintains a good long-cycling performance of 201.6 mA h g^−1 at a high current density of 500 mA g^−1 after 400 cycles,which makes the NMOH cathode competitive for practical applications.     

地下输水隧洞围岩稳定监测系统设计研究

在地下隧洞施工输水整个环节中,施工环境复杂多变。由于地质岩体结构应力、地下水以及岩体力学构造等各方面的不确定、不稳定因素的影响极大,如果仅依靠传统经验来进行管理,已经不符合现代化管理的最基本要求,也无法达到标准化管理。文章首先阐述了地下输水隧洞围岩稳定监测系统设计的目的,然后对设计输水隧洞围岩稳定监测系统进行了分析,以便及时正确掌控地下输水的隧洞围岩发展状态,保证隧洞施工的顺利完成。     

不同改良措施对排土场土壤微形态影响的试验研究

以铁矿排土场废石土为研究对象,自制模型试验装置,设计4种基质改良方法,开展SEM检测实验,并应用IPP软件对SEM照片进行定量化分析,研究在不同改良措施下对铁矿排土场土壤微结构的影响。结果表明：单施3%有机肥土壤孔隙度为16%,与对照组排土场原矿土相比增加了60%。复合施用3%有机肥、掺拌30%的黄土的处理孔隙度达到最大33%。单施3%有机肥、5%有机肥对土壤大团聚体含量皆有显著的促进作用,复合施有机肥、掺拌黄土的处理与单施有机肥的处理对比,土壤大团聚体含量增加并不显著。各改良措施的MWD与FMD均随着土壤中大团聚体的含量增加而增加。     

Radon and moisture impacts from interventions integrated with housing energy retrofits

Energy retrofits can reduce air exchange, raising the concern of whether indoor radon and moisture levels could increase. This pre/post-intervention study explored whether simple radon interventions implemented in conjunction with energy retrofits can prevent increases in radon and moisture levels. Treatment homes (n = 98) were matched with control (no energy retrofits or radon intervention) homes (n = 12). Control homes were matched by geographic location and foundation type. t-tests were used to determine whether post-energy retrofit radon and moisture level changes in treatment homes significantly differed from those in control homes. The radon interventions succeeded in preventing statistically significant increases in first floor radon using arithmetic (p = 0.749) and geometric means (p = 0.120). In basements, arithmetic (p = 0.060) and geometric (p = 0.092) mean radon levels statistically significantly increased, consistent with previous studies which found that basement radon levels may increase even if first floor levels remain unchanged. Changes in infiltration were related to changes in radon (p = 0.057 in basements; p = 0.066 on first floors). Only 58% of the change in infiltration was due to air sealing, with the rest due to weather changes. There was no statistically significant association between air sealing itself and radon levels on the first floor (p = 0.664). Moisture levels also did not significantly increase.     

基于模糊综合评判方法的水文地质类型评价

以开元矿井为例,在水文地质资料基础上,选定合适的指标,根据不同指标的重要程度确定各个指标权重,运用模糊综合评判理论建立矿井水文地质类型划分模型,运用该模型进行水文地质类型评价。     

库水位变动下庄屋滑坡变形与稳定性分析

库水位变动是三峡库区滑坡等地质灾害频发的重要原因之一。为研究库水位变动对库岸涉水滑坡变形和稳定性的影响,以庄屋滑坡为例,结合GPS位移监测数据和数值模拟分析,探讨了该滑坡在库水升降过程中变形和稳定性的响应规律。结果表明,庄屋滑坡受库水影响滑坡后缘变形大于前缘,为推移式滑坡。水位变动过程中,滑坡渗流和稳定性变化具有动水压力型滑坡特点,即在水位上升时滑体内地下水浸润线呈内凹趋势,水位下降时滑体内地下水浸润线呈外凸趋势,且具有一定的滞后性;库水位上升时滑坡稳定性系数增大,水位下降时减小;当库水位保持在恒定水位时,稳定性系数也逐渐趋于稳定。     

基于危险源的水利工程施工全过程安全管理研究

水利工程的特殊性,决定了其在安全管理构建中更加注重全过程管理机制的构建,以及危险源下的精准安全管控。在传统安全管理模式之下,水利工程安全管理盲点多、效率低,不利于全过程安全管理的高效实施。文章立足水利工程的危险辨识,分析了水利工程危险源全过程安全管理中的问题,并在此基础之上,从强化危险源精准辨识、构建危险源动态管理机制、优化危险源评价工作、加快危险源信息库建设等方面,具体论述了危险源下水利工程全过程安全管理措施。     

水射流表面改性对国产Zirlo锆合金包壳管加速腐蚀氧化膜形貌的影响

为进一步提高国产锆合金包壳管性能,提高反应堆安全性,对国产Zirlo锆合金进行水射流冲击强化,研究在高温高压水腐蚀条件下不同冲击压力对样品表面氧化膜的影响,并与未冲击样品进行对比。结果表明,样品表面在不同压力的冲击下耐蚀性差异较大,当冲击压力达到40 MPa时样品表面氧化膜状态较好,相比于未冲击样品氧化膜厚度减少4.3%,在10 MPa和20 MPa冲击下则出现腐蚀加速情况。